Axiomtek PICO841 Bedienungsanleitung PDF herunterladen (Seite 18)

PICO841 Intel

Atom

Processor E3845/E3827 Pico-ITX Board

12 Board and Pin Assignments

2.4 Jumper Settings

Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2

jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration

shows how to set up jumper.

Properly configure jumper settings on the PICO841 to meet your application purpose. Below

you can find a summary table of all jumpers and onboard default settings.

Note

Once the default jumper needs to be changed, please do it under power-off

condition.

Jumper

Description

Setting

JP1

LVDS +12V Voltage Selection

Default: None

None

JP2

LVDS +3.3V/+5V Voltage Selection

Default: +3.3V

1-2 Close

JP4

Auto Power On

Default: Disable

1-2 Close

JP5

LVDS Brightness Control Mode Setting

Default: PWM Mode

1-2 Close

JP6

Restore BIOS Optimal Defaults

Default: Normal Operation

1-2 Close

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

Keine Kommentare

Axiomtek PICO841 Bedienungsanleitung Seite 18